Print

A3 Stoneware

Description

High temperature, smooth, medium plastic, vitreous, buff-white firing, clean native stoneware. A3 clay is not a blend of materials, it is mined from our Ravenscrag, Sask. quarry from a single clay seam. It provides the basis for most of our high-fire stoneware bodies. It is plastic and vires vitreous enough to be used as-is for the production of cone 9-10 stoneware pottery.


Stockpile of A3 at the Plainsman plant

Process Properties

A3 clay is very smooth and slick and its plasticity is a little higher than other clays. This material is fine enough that a simple slaking process on the dry lumps will create a slurry of which +90% passes a 325 mesh screen. From a workability point of view A3 clay is suitable as a major ingredient in stoneware clay bodies. It is balanced enough that it can actually be the only ingredient in a cone 10 buffstone storeware.

Although A3 clay is very fine, it does not disperse or deflocculate. Soluble materials within the clay impede the action of normal deflocculants resulting in gelling of the slurry.

Firing



Since A3 clay is naturally vitreous (but not overly so) at cone 10 it is not necessary to add feldspar to flux it. Midstone can be added to improve vitrification.

Glazing

A3 stoneware is high in quartz and not difficult to fit glazes to, especially at higher temperatures. Its very fine grain and minimal impurities mean that it will present few problems with regard to glaze pinholing.

Physical Properties

 Drying Shrinkage: 1995 6.3-7.3%, 1999 6.0-7.0
 Dry Strength: n/a
 Water Content: 22.0-23.0
 Drying Factor: C130
 Dry Density: n/a

Sieve Analysis (Tyler mesh):

     +48     (300 microns): 0-0.1%
   48-65 (300-210 microns): 0.0-0.3
  65-100 (210-149 microns): 0.2-0.8
 100-150 (149-106 microns): 1.0-2.0
 150-200  (106-75 microns): 1.0-3.0
 200-325   (75-45 microns): 3.0-8.0

Fired Shrinkage:

             1995      1999
   Cone 6: 5.0-6.0%  4.0-5.0%
   Cone 8: 5.5-6.5   4.5-5.5
  Cone 10: 6.0-7.0   5.5-6.0
 Cone 10R: 6.0-7.0   6.0-7.0

Fired Absorption:

             1995      1999
   Cone 6: 1.0-2.0%  4.0-5.0%
   Cone 8: 0.5-1.5   2.5-3.5
  Cone 10: 0.2-0.8   1.5-2.5
 Cone 10R: 0.5-1.5   1.0-2.0

Chemical Analysis

 BaO       0.4
 CaO       0.2
 K2O       2.0
 MgO       0.7
 Na2O      0.1
 TiO2      0.6
 Al2O3    19.4
 P2O5      0.0
 SiO2     66.5
 Fe2O3     1.5
 MnO       0.0
 LOI       8.4%

Safety Data Sheet

Click here for web view.

Logo Plainsman Clays
671 Industrial Ave. SE, Medicine Hat, Alberta T1A 3L5
Phone: 403-527-8535 FAX:403-527-7508
Email: tim.lerner@plainsmanclays.com