A2 Ball Clay
A smooth and highly plastic, buff burning, refractory, coarse grained, lignitic ball clay. A2 is mined in Southern Saskatchewn and is both a ball clay and a fireclay. We have large reserves of this material and it is consistent from mining to mining. Ball clays are suitable in a wide range of ceramic and non-ceramic applications. When A2 is fine ground (which we do not currently do) it is very similar to commercial ball clays from the southern USA (although a more plastic and a little more refractory).
While kaolin is white and clean and considered pure clay mineral, ball clays, by comparison, are generally grey or brownish in color and differ in the following ways:
Plainsman A2 has been actively mined it since the 1970s. While having the same general properties as other commercially available products (e.g. those from the southeastern US), this has several advantages:
A2 being mined at Plainsman quarry in southern Saskatchewan
As a ball clay, thus it improves plasticity of any body recipe to which it is added. However it will also increase drying shrinkage, slow down drying time and increase the difficulty of drying ware without cracking.
Although A2 powder looks like many other ball clays, it is not fine-ground to 200 mesh (the largest particles in the standard 42 mesh size call be felt). For ceramic applications it is thus not suitable in porcelains for whitewares. However in native stonewares it contributes and earth and natural look to the fired surface.
Other applications: We can produce custom mesh sizes and package A2 in bulk bags for non-ceramic applications (please call).
A2 stockpiles at the quarry (in various states of weathering).
A2 42 mesh at cone 10R
A2 has significant iron content so it does not fire white. The soluble salts in A2 will produce a flashing effect during firing in reduction, turning the cream colored surface to brownish. Since we only grind the standard material to 42 mesh, A2 will bring fired speckle to reduction bodies (these are ironstone concretion particles that fuse in reduction atmospheres).
A2 fired bars (cone 10R top) and cone 11 oxidation. Ground to 10 mesh. Formerly called PlasticFire.
Drying Shrinkage (50:50 calcine:raw mix): 5.5-6.5% Drying Factor (50:50 calcine:raw mix): C130 Dry Density (50:50 calcine:raw mix): 1.80
Sieve Analysis (Tyler mesh):
35-48: 0.1-0.4% 48-65: 1.0-3.5 65-100: 1.5-5.5 100-150: 1.0-4.0 150-200: 3.0-7.0 200-325: 5.0-9.0
Fired Shrinkage (50:50 calcine:raw mix):
Cone 6: 4.0-5.0% Cone 8: 4.5-5.5 Cone 10: 5.5-6.5 Cone 11: 5.5-6.5
Fired Absorption: (50:50 calcine:raw mix)
Cone 6: 11.0-15.0% Cone 8: 9.0-11.0 Cone 10: 7.0-9.0 Cone 11: 6.0-8.0
Safety Data SheetClick here for web view.
|Plainsman Clays Ltd.|
702 Wood Street, Medicine Hat, Alberta T1A 1E9
Phone: 403-527-8535 FAX:403-527-7508